Shop

Rainfresh Reverse Osmosis system (commonly called RO) removes dissolved minerals from water such as mercury, nitrates, fluoride, sodium, etc. Most bottled waters are made by reverse osmosis technology and by installing Rainfresh RO in your home, you can have the same fresh and great tasting water at the turn of a faucet. As RO water has very low mineral content, it does not leave white scale deposits (if the supply water is hard or brackish) and is therefore also great for steam irons, indoor plants, tea kettles, humidifiers etc.

Rainfresh Reverse Osmosis System features a 4-stage design with a 50 gallon per day membrane. It also features easy open housings and a cartridge replacement monitor that reminds you every 6 months to replace the filter cartridges (model RO 450M only).

Often consumers regard reverse osmosis as the best drinking water technology for home. While RO does remove a wide range of contaminants, it does not remove most pesticides, VOC & other chemicals and bacteria or viruses.

PERFORMANCE

Excellent choice for reduction of

• chromium III and chromium VI
• copper
• cysts (e.g. Cryptosporidium & Giardia)
• dissolved metals and minerals,
• fluoride
• lead
• mercury
• nitrates
• selenium
• sodium
• chlorine, taste, odour
• sediment, dirt, rust and other suspended solids
• TDS (Total Dissolved Solids)

FEATURES

• 4-stage filtration process
• Electronic monitor that indicates when to change cartridges (RO450M only)
• Stylish chrome faucet
• Produces up to 18 US gallons (68 L) per day using 50 GPD reverse osmosis membrane
• Transparent filter housing – see your filter working!
• No wrench required – easy 1/8th turn bayonet closure allows effortless cartridge changes
• BPA & lead-free materials

INSTALLATION

• Installs easily under kitchen or other convenient location in 60-90 minutes average. l
• All fittings included to attach system under sink to ½” copper pipe. Additional connector kit required for PEX pipe
• Requires a 7/8” hole in the counter-top for the faucet
• Requires water pressure of 50 psi minimum. High pressure pump available online if water pressure is lower than 50 psi
• Can be installed in the basement with tube running to faucet. Unit must not be more than 15 feet away

REPLACEMENT CARTRIDGES

• Pre-filter cartridges (model HP1 or SW1 and CF2) to be replaced every 6 months
• Post-filter cartridge model IM200 to be replaced once a year
• Pre and post filter cartridges available at most retail stores in Canada and their websites. Click on the “Where to buy” tab for list of retailers
• Reverse Osmosis membrane lasts 2 to 5 years depending on water quality and usage. Available online

TESTING AND CERTIFICATION

• Tested and certified by CSA International to CSA B483.1, to NSF/ANSI Standard 58 for reduction TDS and to NSF/ANSI 372 for low lead

WARRANTY

• 1-year limited warranty

WHAT’S INCLUDED

• Includes reverse osmosis system, chrome faucet, cartridges, RO membrane, storage tank, all fittings, tubing and easy-to-follow instructions for do-it-yourself installation on copper pipe. Additional connector kit required to attach to PEX pipe

Download brochure (PDF):

• RO450 Brochure  English
• RO450H Brochure English

Download Performance Data Sheet (PDF):

• Reverse Osmosis Performance Data Sheet English

Download Product Manual (PDF):

• RO450 & RO450H manual English and French

What is Reverse Osmosis (RO)?

Reverse Osmosis (or simply RO) is a water treatment method that reduces mineral content in water. It involves passing water under pressure through a very tight membrane that allows only water molecules to pass through and rejects most mineral salts.

Among its many uses in industry, it is used extensively all over the world to convert sea water to drinking water (desalination) and for reducing harmful contaminants in potable water. Most bottled waters are made using Reverse Osmosis.

How are Reverse Osmosis (RO) systems different from other drinking water systems?

Reverse Osmosis (RO) systems are installed where reduction of specific contaminants is required. For example sodium, dissolved salts, mercury, nitrates, copper, fluoride, selenium etc. If your water has any such contaminant or tastes “salty”, RO is the way to go.

Other drinking water systems reduce contaminants that Reverse Osmosis systems do not reduce, such as chemicals, herbicides & pesticides, Volatile Organic Compounds (VOC), Trihalomethanes (THM), MTBE, etc. Ceramic filter-based systems also reduce bacteria, coliform etc. Therefore, it depends on what your specific need is.

I have bacteria or Coliform in my water. Should I install an RO system?

No. Contrary to popular misconception, Reverse Osmosis systems should not be installed on water that is microbiologically unsafe. It is the nature of the process that does not make it a fool proof disinfection device. However, Reverse Osmosis systems can remove filterable cyst (e.g. Cryptosporidium, Giardia etc).

If you have bacteria or coliform in your water, you should either install a Rainfresh UV system on the main water line to disinfect all the water in your home before you install the RO system. Alternatively you can install Rainfresh Drinking Water System 1, 2 or 3 instead to remove bacteria & coliform at one tap.

I’ve heard RO systems waste a lot of water. Is that true?

The nature of RO technology is such that when water flows through it, some of it is collected as clean drinking water, while the rest of the water, along with the contaminants, flows down to drain. To put the waste water in perspective, on an average, however, for a family of 4, the total amount of water that goes to drain is equivalent to 2-3 additional toilet flushes a day. This varies with water usage and quality.

I have heard that by drinking RO water, your body is deprived of minerals. Is it true?

Our body gets most of its minerals from the food we eat, not from the water we drink. For example, a glass of orange juice can have the same mineral content as you can get in 30 gallons of water! Try drinking that for minerals!! What’s more, RO water tastes great as well and that’s why most bottled waters are made using RO process.

Can I install RO on the main line to treat all the water in my home?

Installing RO on the main line is impractical, wasteful and expensive. RO produces high quality water, which will be a waste flushing down in the toilet. Waste water from the RO will be high and all the copper piping in the house will have to be changed to plastic!

Is it hard to install an RO system?

Installing an RO requires basic DIY skills and simple tools. No soldering is required.  It can take anywhere from 60 – 90 minutes

Can I hook up the RO system to a refrigerator/icemaker?

Yes, it is common. All you will need is a 1/4” tee and some ¼” OD tubing. Cut the tube that takes RO water from the unit to the faucet and insert the tee here. Then run off the extra tubing from here to the back of your fridge.

Can I install the RO system in the basement?

Yes you can do that, provided the unit is not more than 10-12 feet away from the faucet. If you are planning on installing it at a remote location, you will require an additional delivery pump. You will also need to re-route the drain line. Call Rainfresh for details.

Where can I buy the Rainfresh RO system?

Rainfresh RO systems are available across Canada at major retailers. Click on the “where to buy” tab for a list of retailers. You can also buy replacement filter cartridges at the same retailers. They are also available through our international distributors. Please call us to find out where you can buy the Rainfresh RO in your country.

How come some RO systems are very expensive and others are so cheap?

Expensive does not always mean better. When you buy a product through a local supplier, there are bound to be extra costs and charges. At the same time, a lot of offshore products are also available that do not meet any safety and performance requirements.  It has always been our goal to bring our customers the best technology at the most affordable prices. Rainfresh ROs are tested to the highest industry standards (NSF/ANSI 58 & CSA B483.1).

I understand that there is a standard for testing RO systems. Is the Rainfresh RO system tested?

The highest industry standard for testing RO systems is the NSF/ANSI standard 58. Rainfresh RO system is tested and certified by CSA International to NSF/ANSI 58. This standard includes testing for material safety, structural integrity and, of course, performance. It is also certified to CSA B483.1, the new Canadian standard, and to NSF/ANSI 372 for low lead requirements.

Have more questions? Enter you own question below and our customer service will get back to you within 24 hours.

Buy Reverse Osmosis System parts direct from Rainfresh Online Store

Top rated Reverse Osmosis System!
Rainfresh Reverse Osmosis system Canada (commonly called RO) removes dissolved minerals from water such as mercury, nitrates, fluoride, sodium, etc. Most bottled waters are made by reverse osmosis technology and by installing Rainfresh RO in your home, you can have the same fresh and great tasting water at the turn of a faucet. As RO water has very low mineral content, it does not leave white scale deposits (if the supply water is hard or brackish) and is therefore also great for steam irons, indoor plants, tea kettles, humidifiers etc.

Rainfresh Reverse Osmosis System Canada features a 4-stage design with a 50 gallon per day membrane. It also features easy open housings and a cartridge replacement monitor that reminds you every 6 months to replace the filter cartridges (model RO 450M only). Rainfresh reverse osmosis system uses model HP1 or SW1, 1 micron sediment pre-filter cartridge, model CF2 carbon pre-filter, model ROM50 reverse osmosis membrane and model IM200 post-filter cartridges. All the replacement cartridges are available from the same store where the RO is available.

Water first goes through a 1 micron sediment pre-filter followed by a carbon filter that reduces chlorine, taste and odour. The RO membrane is next that reduces dissolved metals and ions by >95%. The water is then stored in a pressure tank. The last stage of the system is a taste polishing filter before the water is dispensed through the air-gap faucet.

Reverse Osmosis system Canada is ideal for situations where water has high mineral salt content, often referred to as TDS (Total Dissolved Solids). Water with TDS >500PPM can be improved using a reverse osmosis system.

Often consumers regard reverse osmosis as the best drinking water technology for home. While reverse osmosis system does remove a wide range of contaminants, it does not remove most pesticides, VOC & other chemicals and bacteria or viruses.

Rainfresh RO system Canada is tested and certified by CSA Group to NSF/ANSI58, to CSA B483.1 and to NSF/ANSI372 for low lead requirements. What’s more – it is made in Canada.