-
Click to buy online or in store at:
Also available in store at the following retailers
Not all models are available in store at all locations/retailers. If you questions regarding availability of a particular model, please call your local store or Rainfresh support.
-
Rainfresh RW2 fridge filter is guaranteed to fit in place of the following OEM fridge filter models:
- WHIRLPOOL* 4396508, 4396510, 8212491, 4392857
- KITCHENAID* 4396163, 4396547, 8212491
- MAYTAG* 8212652
- THERMADOR* 491879
- KENMORE* 46-9010, 46-9902, 46-9908
- PUROCLEAN* IV 8212652
- High performance and economical replacement fridge filter designed to fit in place of OEM refrigerator water filters
- Delivers clean, clear water that looks and tastes great
- Reduces PFOA / PFOS, lead, cysts, pharmaceuticals, chlorine, taste, odour, and sediment (see performance data sheet for list of contaminants reduced)
- Does not remove beneficial minerals
- Economical compared to OEM fridge filters. Saves you $$$
- 6-month life
- Certified to NSF/ANSI 42, 53, and CSA B483.1
- Independently tested to NSF 401 for reduction of Pharmaceuticals (Phenytoin, Ibuprofen, Naproxen, Estrone, Bisphenol A, Nonylphenol)
* – Trademarks and registered trademarks of other manufacturers NOT associated in any way with Envirogard Products Limited
Performance:
Reduces the following contaminants:
- PFOA
- PFOS
- Lead
- Cyst
- Phenytoin
- Nonylphenol
- Naproxen
- Ibuprofen
- Estrone
- Bisphenol A
- Chlorine, bad taste and odour
- Sediment
Filter Cartridge Life:
300 US gal (1,136L) or 6 months.
Testing and Certification:
Tested and certified by CSA Group to NSF/ANSI 53 for the reduction of Lead, Cyst, PFOA and PFOS, to NSF/ANSI 42 for reduction of Chlorine, taste and odour and to CSA B483.1
Independently tested to NSF 401 for reduction of Pharmaceuticals (Phenytoin, Ibuprofen, Naproxen, Estrone, Bisphenol A, Nonylphenol)
-
Download installation instructions (PDF):
Download Performance Data Sheet (PDF):
Download Fridge Filter Selection Guide (PDF)
-
Will this Rainfresh fridge filter fit in place of my original fridge filter?
Yes, it is guaranteed to fit in place of the fridge filter models listed in the product description and the package
Is the Rainfresh fridge filter as good as my original fridge filter?
The Rainfresh fridge filter has as good, or better, performance as compared to your OEM fridge filter. It is certified to NSF/ANSI standard 53 and 42 for reduction of lead, chemicals, pesticides, chlorine, taste and odour. It is also certified to CSA B483.1.
Is it easy to change one of the fridge filter?
Yes. The Rainfresh fridge filter can be changed by the average homeowner easily in seconds. Instructions are included with the product.
Does the Rainfresh fridge filter have an expiration date?
No. The fridge filter can sit on your shelf until you need it.
Do I need to lubricate the gaskets on my filter?
Generally, the fridge water filter does not need any lubrication but a packet of food grade lubricant is included with the fridge filter for ease of installation and removal.
How tightly should I install the filter?
The fridge filter will hit a stop when fully tightened. As long as you install it by hand (not using tools) you will feel the filter hit the stop and know that it is properly installed.
I just installed my filter; do I need to run water through the filter before I drink the water?
It is recommended to run water through the filter for about 3 gallons to flush out the filter and get the filter thoroughly wet so that you get the best performance out of the filter.
I just installed my filter and there are black particles in the water/ my water is a dark color – is that normal?
Yes. The particles are from the carbon block inside the filter. Sometimes water may be temporarily milky due to tiny air bubbles displaced from the filter. The water is safe to drink and should clear up in a few days as you use your filter more. If your water does not clear up within 3-4 days, please contact us
How long does this fridge filter last once it is installed?
On average it should last up to 6 months or 300 gallons depending on your water quality and usage.
Have more questions? Enter you own question below and our customer service will get back to you within 24 hours.
-
-
Fits in place of Whirlpool 4396508 fridge filter, Kitchenaid*, Maytag*, Thermador*, Kenmore*, and Puroclean* refrigerator water filters (see model numbers below)
- Delivers clean, clear water that looks and tastes great
- Fridge filter reduces chemicals, , taste, odour and sediment (see performance data sheet for list of contaminants reduced)
- Does not remove beneficial minerals
- Rainfresh fridge filter is economical. Saves you $$
- 6 month life
- Certified to NSF/ANSI 53, 42 and CSA B483.1
Rainfresh RW2 is guaranteed to fit and perform equally or better than the original Whirlpool* 4396508 fridge filter. An excellent choice in place of expensive fridge filters.
This filter is guaranteed to fit in place of Whirlpool* 4396508 fridge filter and the following OEM fridge filter models:
- WHIRLPOOL* 4396508, 4396510, 8212491, 4392857
- KITCHENAID* 4396163, 4396547, 8212491
- MAYTAG* 8212652
- THERMADOR* 491879
- KENMORE* 46-9010, 46-9902, 46-9908
- PUROCLEAN* IV 8212652
Performance:
Reduces the following contaminants:
- PFOA
- PFOS
- Lead
- Cyst
- Phenytoin
- Nonylphenol
- Naproxen
- Ibuprofen
- Estrone
- Bisphenol A
- Chlorine, bad taste and odour
- Sediment
Filter Cartridge Life: 300 US gal (1,136L) or 6 months.
Testing and Certification
Tested and certified by CSA Group to NSF/ANSI 53 for the reduction of Lead, Cyst, PFOA and PFOS, to NSF/ANSI 42 for reduction of Chlorine, taste and odour and to CSA B483.1
Independently tested to NSF 401 for reduction of Pharmaceuticals (Phenytoin, Ibuprofen, Naproxen, Estrone, Bisphenol A, Nonylphenol)
Rainfresh RW2 that fits in place of Whirlpool* 4396508 fridge filter can be purchased at any Canadian Tire, McMunn and Yates and RONA store.
INSTRUCTIONS:
Protect filter cartridge from freezing.
Kindly do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system.
1. Locate filter below the refrigerator. Slowly turn the filter cartridge ¼ turn counter-clockwise and remove. Slide knob off from old filter.
2. Remove all packaging, and remove the red protective cap from the top. Note installation date on reminder sticker and place in a convenient visible location.
3. Slide knob from old filter on to new filter. Please insert filter into refrigerator and turn ¼ turn clockwise until firmly seated.
4. Run water for 3 minutes through the dispenser to flush the filter.
5. Check the filter for any leaks or any sign
of moisture. Your new filter is ready for use.
* – Trademarks and registered trademarks of other manufacturers NOT associated in any way with Envirogard Products Limited
-
There are no reviews yet, would you like to submit yours?