Shop
UV Lamps, Quartz Domes & Accessories
GENUINE RAINFRESH UV Lamps & domes are designed with extensive product research and engineering to provide reliable and consistent UV output and performance that ensures the safety of your drinking water.
Use of non Rainfresh lamps will void warranty & product certification & can result in unsafe drinking water, ballast failure or electrical fire.
-
GENUINE Rainfresh UV Lamp Model Where to Buy R519L 
or 
R830L 
or R1245L or RUV5L, RUV8L and RUV12L or Please call Rainfresh if you have questions or concerns about the availability of GENUINE Rainfresh UV lamps.
-
Rainfresh UV Lamps
UV lamp must be replaced after 9000 hours (approx 1 year) of use regardless of its apparent condition. Using a UV lamp beyond it’s rated life can result in unsafe drinking water.
UV Lamp Model For use only with Rainfresh UV Model Available at Rainfresh R519L Rainfresh R519 See “Where to Buy” TabRainfresh R830L RainfreshR830 See “Where to Buy” Tab Rainfresh R1245L RainfreshR1245 See “Where to Buy” TabRainfresh RUV5L Rainfresh RUV5 Rainfresh RUV8L Rainfresh RUV8 Rainfresh RUV12L Rainfresh RUV12 Rainfresh Quartz Domes
Quartz domes must be replaced after every 3 years of use to ensure proper disinfection.
Quartz Dome Model For use only with Rainfresh UV Model Available at Rainfresh R519QD Rainfresh R519 Rainfresh R830QD RainfreshR830 Rainfresh R1245QD RainfreshR1245 Rainfresh RUV5QD Rainfresh RUV5 Rainfresh RUV8QD Rainfresh RUV8 Rainfresh RUV12QD Rainfresh RUV12 Solenoid Valves
Solenoid valve is an optional safety accessory for Rainfresh UV systems. It’s function is to shut off the water supply in case of power-failure, UV lamp or ballast failure, thereby preventing consumption of untreated drinking water. RC8s & RC14S solenoid valves also shut the water off when the UV dose drops below 40mJ/cm2. Solenoid valves are installed on the outlet of the UV system and plug into the ballast.
Solenoid Valve Model For use only with Rainfresh UV Model Available at R830S Rainfresh R519, R830 & R1245* RC8S Rainfresh RC8 RC14S Rainfresh RC14 and RC20 * Requires upgraded UV ballast with solenoid output option
Flow Control
Inline flow controls are another optional accessory for UV systems that limit the water flow rate through a UV system to its maximum capacity. Inline flow controls are designed for use on copper pipe and feature compression fittings for non-solder easy installation.
Flow Control Model For use only with Rainfresh UV Model FR5K Rainfresh R519 FR8K Rainfresh R830 FR12K Rainfresh R1245 Other UV Parts and Accessories
To order other UV parts and accessories, please order online from Rainfresh Web Store
-
UV Lamp & Dome Replacement Manual
-
Have more questions? Enter you own question below and our customer service will get back to you within 24 hours.
-
R830L UV lamp
Use only GENUINE RAINFRESH R830L UV Lamp with your UV system. Rainfresh UV lamps are designed with extensive product research and engineering to provide reliable and consistent UV output and performance that ensures the safety of your drinking water. Using non-Rainfresh UV lamps can not only compromise the system performance but also voids the electrical and CSA certification on the product and may result in any one or more of the following issues:
- Unsafe drinking water • Ballast failure • Electrical fire
Use of non Rainfresh lamps will void warranty & product certification
You can also buy genuine Rainfresh quartz domes
Rainfresh R830L and other UV lamps, quartz domes are available at major retailers including Canadian Tire, Home Hardware, RONA, Lowe’s, TSC stores and other major retailers. Quartz domes are also available online directly from Rainfresh website.
Solenoid Valves
Solenoid valve is an optional safety accessory for Rainfresh UV systems. It’s function is to shut off the water supply in case of power-failure, UV lamp or ballast failure, thereby preventing consumption of untreated drinking water. RC8s & RC14S solenoid valves also shut the water off when the UV dose drops below 40mJ/cm2. Solenoid valves are installed on the outlet of the UV system and plug into the ballast. To order a solenoid valve, you will need to order a ballast with a solenoid output as that is not a standard feature. The solenoid valve is 12V Dc and plugs into the ballast.
Flow Control
Inline flow controls are another optional accessory for UV systems that limit the water flow rate through a UV system to its maximum capacity. Inline flow controls are designed for use on copper pipe and feature compression fittings for non-solder easy installation.
Other UV Parts and Accessories
To order other UV parts and accessories, please order online at : www.rainfreshtore.ca
-
Reviews
Add a review
Excellent.
An effective product .