- LG* LT700P, ADQ36006101, ADQ36006101-S, ADQ36006101S, ADQ36006102, ADQ36006102-S, DQ36006102S, 048231783705, ADQ36006101
- KENMORE* 9690, 46-9690, LT700P
Rainfresh RL3 fridge filter is available at the following store:
Rainfresh RL3 fridge filter is guaranteed to fit in place of the following OEM fridge filter models:
Performance:
Reduces the following contaminants:
Filter Cartridge Life:
200 US gal (757L) or 6 months.
Testing and Certification:
Tested and certified by CSA Group to NSF/ANSI 53 for the reduction of Lead, Cyst, PFOA and PFOS, to NSF/ANSI 42 for reduction of Chlorine, taste and odour and to CSA B483.1
Independently tested to NSF 401 for reduction of Pharmaceuticals (Phenytoin, Ibuprofen, Naproxen, Estrone, Bisphenol A, Nonylphenol)
* – Trademarks and registered trademarks of other manufacturers NOT associated in any way with Envirogard Products Limited
Download installation instructions (PDF):
Download Performance Data Sheet (PDF):
Will this Rainfresh fridge filter fit in place of my original fridge filter?
Yes, it is guaranteed to fit in place of the fridge filter models listed in the product description and the package
Is the Rainfresh fridge filter as good as my original fridge filter?
The Rainfresh fridge filter has as good, or better, performance as compared to your OEM fridge filter. It is certified to NSF/ANSI standard 53 and 42 for reduction of chemicals, pesticides, chlorine, taste and odour. It is also certified to CSA B483.1.
Is it easy to change one of the fridge filter?
Yes. The Rainfresh fridge filter can be changed by the average homeowner easily in seconds. Instructions are included with the product.
Does the Rainfresh fridge filter have an expiration date?
No. The fridge filter can sit on your shelf until you need it.
Do I need to lubricate the gaskets on my filter?
Generally, the fridge water filter does not need any lubrication but a packet of food grade lubricant is included with the fridge filter for ease of installation and removal.
How tightly should I install the filter?
The fridge filter will hit a stop when fully tightened. As long as you install it by hand (not using tools) you will feel the filter hit the stop and know that it is properly installed.
I just installed my filter; do I need to run water through the filter before I drink the water?
It is recommended to run water through the filter for about 3 gallons to flush out the filter and get the filter thoroughly wet so that you get the best performance out of the filter.
I just installed my filter and there are black particles in the water/ my water is a dark color – is that normal?
Yes. The particles are from the carbon block inside the filter. Sometimes water may be temporarily milky due to tiny air bubbles displaced from the filter. The water is safe to drink and should clear up in a few days as you use your filter more. If your water does not clear up within 3-4 days, please contact us
How long does this fridge filter last once it is installed?
On average it should last up to 6 months or 200 gallons depending on your water quality and usage.
Have more questions? Enter you own question below and our customer service will get back to you within 24 hours.
No replacement parts.
Rainfresh RL3 fits in place of LG LT700P fridge filter.
Rainfresh RL3 fridge filter is guaranteed to fit in place of LG LT700P and the following OEM fridge filter models:
Performance:
Reduces the following contaminants:
Filter Cartridge Life : 200 US gal (757 L) or 6 months.
Testing and Certification:
Tested and certified by CSA Group to NSF/ANSI 53 for the reduction of Lead, Cyst, PFOA and PFOS, to NSF/ANSI 42 for reduction of Chlorine, taste and odour and to CSA B483.1
Independently tested to NSF 401 for reduction of Pharmaceuticals (Phenytoin, Ibuprofen, Naproxen, Estrone, Bisphenol A, Nonylphenol)
* – Trademarks and registered trademarks of other manufacturers NOT associated in any way with Envirogard Products Limited
INSTRUCTIONS
1. Push button to open filter cover
2. Pull cartridge down. Pull out the filter.
NOTE: If the filter is hard to remove, turn off water
supply and relieve pressure at refrigerator door
water dispenser before installing new filter
3. Holding new filter, remove the packaging
and end-cap
4. Push the new filter into the manifold hole until
it stops
5. Push the cover back up until it clicks into place
6. Run water from the dispenser for 5 minutes at
0.5 GPM (about 2½ gallons) to
clear the system and prevent sputtering.
7. Reset the “replace filter” light, if needed, by
holding the reset button for three seconds.
8. Check the filter for any leaks. Inspect the mount
area and filter bottom for any sign of moisture.
Your new filter is ready for use
There are no reviews yet, would you like to submit yours?